| Key Data Set Information | |
| Location | IT |
| Geographical representativeness description | global |
| Reference year | 2023 |
| Name |
|
| Use advice for data set | cradle to gate with options: A1, A2, A3, A4, C1, C2, C3, C4, D |
| Technical purpose of product or process | "The mechanical properties of weldable hot-rolled coils, combined with a compact yet heavy packaging, facilitate storage in confined spaces. The special coil-on-coil processing ensures accurate and faster coil unwinding, giving considerable increases in output. The reduced number of daily changes results in fewer downtimes, less scrap and a higher level of safety in the workplace." "Stretched coil: Cross section range 6 = Ø = 20 mm Weight from 2 500 to 5 000 kg per coil Total wire length up to 22 000 m" |
| General comment on data set | Data quality has been assessed and validated during data collection process. According to ISO 14040 and 14044, allocation is avoided whenever possible by dividing the system into sub-systems. According to EN:15804 the applied cut-off criterion for mass and energy flows is 1%. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2028 |
| Technological representativeness | |
| Technology description including background system | "Adherence and surface geometry fR or fP : - for Ø 6 mm fR or fP = 0.037 - for Ø 8 mm fR or fP = 0.045 - for Ø 10 mm fR or fP = 0.052 - for Ø 12 mm fR or fP = 0.056 - for Ø = 14 mm fR or fP = 0.059 Weldability: Ceq < 0.52 Typical yield stress: Re or Rp0.2 > 450 MPa Elongation: Agt > 2,5% Successful in bend and rebend test Successful in Tensile strength test and Fatigue strength test" |
| Type of data set | EPD | ||||
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2023-11-29T10:24:33 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 5cc1b090-615b-4299-ae03-b5a4ebca8c6d |
| Date of last revision | 2023-11-28T11:24:57.7260845Z |
| Data set version | 00.03.001 |
| Registration authority |
EPDItaly
|
| Registration number | EPDITALY0432 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
| |
Indicators of life cycle