Close Go back Collapse all sections
Process Data set: 1 Cenuprem C (no) en

Key Data Set Information
Location IT
Geographical representativeness description Italian
Reference year 2025
Name
1 Cenuprem C
Use advice for data set cradle to gate: A1, A2, A3
Technical purpose of product or process premixes Cenuprem C
General comment on data set 1 t premixes The Buzzi Unicem group annually feeds the EPD process with primary data relating to the manufacture of each product; any primary data of external origin are instead subject to validation by the Ecology, Environment and Safety Department of the Buzzi Unicem group. Finally, third-party verification certifies the overall reliability of the EPD process. If allocation cannot be avoided, it is handled in accordance with the relevant ISO standards (14040, 14044), in which case mass allocation is adopted. The auxiliary energy consumption is split between clinker and cement to the extent of 66% and 34%: the criterion is to be considered representative for the two processes. In accordance with regulatory standards, the cut-off criterion is set at 1% of mass and energy flows. Packaging transport and lubricating oils and greases for plant maintenance fall into the 1%.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Innhold av biogent karbon i produkt: 0.0 kg
  • Innhold av biogent karbon i emballasjen: 0.0 kg
Time representativeness
Data set valid until 2030
Time representativeness description "2025-09-10" - "2030-09-10"
Technological representativeness
Technology description including background system Product composition: NATURAL MP 95,05% NON-NATURAL MP 4,4% RECOVERED WASTE 0,55%

Indicators of life cycle

IndicatorDirectionUnit Production
A1-A3
Input
  • 201
Input
  • 233.8
Input
  • 434.8
Input
  • 1116
Input
  • 257.1
Input
  • 1373
Input
  • 0.92
Input
  • 0
Input
  • 0
Input
  • 0.55
Output
  • 0
Output
  • 0
Output
  • 0.000421
Output
  • 0
Output
  • 0.1
Output
  • 0
Output
  • 0
Output
  • 0

IndicatorUnit Production
A1-A3
Abiotisk utarmingspotensial for fossile ressurser, fosile brensler (ADP-fossil)
  • 1.35E+3
Abiotisk utarmingspotensial for ikke-fossile ressurser, mineraler (ADP-elements)
  • 0.0000185
Forsurningspotensial for kilder på land og vann (AP)
  • 0.42
Potensial for nedbryting av stratosfærisk ozon (ODP)
  • 0.00000194
Overgjødslingspotensial til ferskvann (EP-freshwater)
  • 0.00147
Overgjødslingspotensial til hav (EP-marine), hav og jord
  • 0.13
Overgjødslingspotensial til jord (EP-terrestrial)
  • 1.52
Globalt oppvarmingspotensial - biogene kilder( GWP-biogenic)
  • 0.14
Globalt oppvarmingspotensial - fossile brensler (GWP-fossil)
  • 155.2
Globalt oppvarmingspotensial arealbruk endringer i bruk av arealer (GWP-luluc)
  • 0.09
Globalt oppvarmingspotensial -totalt (GWPtotal)
  • 155.4
No records found.
Potensial for fotokjemisk oksidantdanning (POCP)
  • 0.51
Utarmingspotensial for vannressurser (WDP)
  • 18.89

IndicatorUnit Production
A1-A3
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Økotoksisitet, ferskvann (ETP-fw) 2
  • 314.6
Toksisitet påvirkning på mennesker, kreft (HTP-c) 2
  • 2.46E-8
Toksisitet påvirkning på mennesker, andre effekter enn kreft (HTP-nc) 2
  • 5.06E-7
Ioniserende stråling, helseeffekt (IRP) 1
  • 0.84
Påvirkninger knyttet til arealbruksendringer / jordkvalitet (SQP) 2
  • 2019
Partikkelutslipp (PM) 2
  • 0.00000561